Haulm Toppers by SCOTTS Precision

The Trinity Haulm Toppers range are designed to overcome the need for an expensive and generally high-maintenance cross conveyor, shear plates have been utilised to give a similar effect as a straw chopper. This in turn finely chops the haulm to the point where the following potato harvester can sieve the debris without the use of haulm rollers

The Trinity 31B is designed to pulverise either 3 x 90cm rows, 4 x 75cm rows, or 4 x 80cm.- Front or Rear mounted

. The working width is 3.1 metres, allowing a greater number of longer flails to be fitted in the outer valley bottoms, which drastically improves suction.

The Trinity 36B is designed to pulverise 4 x 75cm – 90cm rows in 1.8m wheel tracks.- Front or rear Mounted

Fitted with a split drive and dual rotors with 2 opposing centre bearings, the working width is 3.6 metres, allowing a greater number of longer flails to be fitted in the outer valley bottoms, which drastically improves suction.

The Trinity 54B is designed to pulverise 6  x 75cm – 90cm rows in 1.8m wheel tracks.- Front or Rear mounted.

Fitted with a split drive and dual rotors with 2 opposing centre bearings, the working width is 5.77 metres, allowing a greater number of longer flails to be fitted in the outer valley bottoms, which drastically improves suction.

The Trinity 6000 is designed to pulverise 6 x 75cm to 100cm rows – Hydraulic folding, Front & Rear mounted.

This haulm topper consists of one front linkage mounted reversible topper with two additional topper units attached to a rear-mounted hydraulically folding tool bar. This system is designed to work on bed widths varying from 1.5 metres up to 2 metres. To overcome the need for an expensive and generally high maintenance cross conveyor, shear plates have been utilised to give a similar effect as a straw chopper. This in turn finely chops the haulm to the point where the following potato harvester can sieve the debris without the use of haulm rollers. Fitted with 3 identical and reversible up to 3.1m rotors, this allows a greater number of longer flails to be fitted in the outer valley bottoms, which drastically improves suction.

• Category 2 linkage is on the front unit, and Category 3 linkage is on the rear unit.
• Replaceable steel inner liner for hood protection is unique to the Trinity range of toppers.
• Shear plates to assist in fine chopping of haulm with the choice of single row or full bed width deflectors.
• Inspection hatches are on the front unit.
• Ridgepress system featuring individually sprung loaded 24” wheels.
• Adjustable row and bed widths range from 75cm to 100cm.
• V belts increased to 5 belts per topper unit, upping the power transfer to a class-leading 250hp.
• Remote greasing.
• LED road lights.